Extron Electronics SSP 7.1 User Guide - Manual (Page 88)

X2& — Dolby Pro Logic II/IIx Music Dimension Control
0 = Neutral (default)
1 = Front
2 = Back
X2* — Lip Sync Offset 000 to 1000 in 0.1 ms increments (0 - 100 ms)
X3! — Speaker Groups
1 = Left and Right Front
2 = Center
3 = Left and Right Surround
X3@ — Surround Back Speaker Size
0 = None (default)
1 = 1 small speaker
2 = 2 small speakers
3 = 1 large speaker
4 = 2 large speakers
X3# — Output Channel Trim adjustment range in dB (-24 to +12 dB in 1 dB steps;
default 0 dB)
X3$ — Noise Test Source
0 = None (default)
1 = Dolby
2 = Pink noise
X3% — Dolby Pro Logic II/IIx Music Panorama
0 = Off (default)
1 = On
X3^ — Mono Output
1 = Center only (default)
2 = Front Left and Right only
X3& — Dynamic Range Compression
0 = Off (default)
1 = MIN
2 = MAX
X3* — Mode Override Group
0 = No Mode Override (no LEDs on)
1 = Multichannel Downmix (DOWNMIX)
2 = Dolby Pro Logic II/IIx ( PL II/IIx)
3 = DTS Neo:6 (DTS NEO:6)
4 = To All (TO ALL)
X3( — Mute Status
Eight digit representation with each position in the sequence representing a speaker. The
speakers are listed in the same order as in
X@ .
0 = unmuted
1 = muted
For example, Mut 00100001 means the right front speaker and subwoofer are muted and
all other speakers are unmuted.
SSP 7.1 • SIS Commands 82