Accu-Chek insulin pump - Manual (Page 15)

Chapter 1: Understanding Your New System ACCU-CHEK Spirit Insulin Pump
14
Chapter 1: Understanding Your New System ACCU-CHEK Spirit Insulin Pump
STOP Screen
The STOP screen shows the current time and date, the STOP symbol, reminder
information (such as “battery low”), and special functions (such as KeyLock locked
or unlocked). Some functions must be programmed while your pump is in STOP
mode, when insulin is not being delivered. Your pump must also be in STOP mode
before you can change cartridges. Additionally, always disconnect your pump from
the infusion site and place the pump in STOP mode when you prime the infusion
set and/or when you transfer data. See the section “Stopping Insulin Delivery”
(page 66) for instructions on stopping your pump.
QUICK INFO Screen
If you press the f key from the RUN or STOP
screen, your pump displays the remaining cartridge
content in units. Symbols for activated functions and
features (like the beep and vibration alarm signals) are displayed. Your pump will
return to the RUN or STOP screen after 8 seconds.
Information, Function, and Setup Screens
You will need to access various screens so you can view stored information,
program the pump, perform a function, or change a setting. You can reach
these screens from either the RUN or STOP screen.
time
pump timer
battery low
cartridge low
date
KeyLock unlocked