Accu-Chek insulin pump - Manual (Page 79)

Follow the steps below:
1. From the RUN screen press and hold s (a) until you hear a beep
sequence and feel a vibration.
This activates the “Quick” STANDARD
BOLUS function.
2. Press a (s) repeatedly until the bolus amount is reached.
Each press of the a (s) key adds one bolus
increment to the bolus amount. Your pump
beeps and vibrates simultaneously once for
each programmed bolus increment.
Five seconds after the last press of a (s), your pump confirms the total
bolus amount with one beep and vibration for each bolus increment programmed.
The Standard Bolus symbol ( ) blinks for 5 seconds (the bolus delivery
start delay).
After this bolus delivery start delay, the pump beeps three times and then
begins to deliver the total bolus amount programmed. The countdown of the
remaining bolus amount appears on the display.
Hint:
Start programming with the a key in areas of poor lighting, as this
will also turn on the backlight.
RUN
screen
bolus
amount
confirmation
of amount
3 sec.
5 sec. delay 3 sec. if O unit bolus
delivery
A8: bolus cancelled
5 sec. delay
Chapter 4: Boluses and TBRs ACCU-CHEK Spirit Insulin Pump
78