Power-up procedure -9, Power-up procedure – ADTRAN TSU 120e User Manual
Page 37
Chapter 2. Installation
61202129L1-1
TSU 120 User Manual
2-9
At this point, the Unit Initialization procedure is concluded. If
the unit is to be configured remotely, there are no additional
items necessary to complete prior to executing remote configu-
ration.
The Passcode, the Unit ID, and the Control Port settings are
stored in a nonvolatile memory. This ensures they are operable
for subsequent power-up sequences.
Power-Up Procedure
After the unit has been put into operation with the initial
power-up and initialization, the subsequent power-up proce-
dure includes only the power-up self-test followed by the
request for a passcode (password) if this option was selected
during initialization. Use the
Number Keys
to enter the previ-
ously recorded passcode and press
Enter
.