Figure 5-9. create temp selection screen -17 – ADTRAN TSU 120e User Manual
Page 75
Chapter 5. Configuration Menu
61202129L1-1
TSU 120 User Manual
5-17
With the cursor on
CREATE
TEMP
, press
Enter
. The unit displays
the selection screen with the cursor positioned on the first
selection DS0 number. See Figure 5-9.
Figure 5-9. Create Temp Selection Screen
1.
Use either the
Arrow Keys
or
Numbers
to enter the DS0
number (do not mix the use of the keys).
2.
Press
Enter
to complete the selection and move the cur-
sor to Port, the next field.
3.
Scroll to select the port which is dependent on the
installed option card.
4.
Press
Enter
to complete the selection and move the
cursor back to the DS0 field.
5.
With the cursor on the DS0 field, the DS0 number can
be incremented or decremented by scrolling.
6.
Press
Copy
to place the contents of the last DS0 in the
new DS0 number.
7.
When all entries are complete, press
Cancel
to move
the cursor to the last of the submenu choices,
6
)
APPLY
.
8.
Either apply the newly created DS0 map or press
C
ANCEL
to return to the
DS
0
MAP
A
(
B
)
submenu
choices.
Selecting
Apply
will not disrupt the operation of unmodified
ports.
Select DS0 Number
Select Port