ADTRAN TSU 120e - Manual (Page 74)

Chapter 5. Configuration Menu
5-16 TSU 120 User Manual 61202129L1-1
DSO Map Example
A sample selection follows:
DS0: 01 to 24
PORT: IDLE, TST, + option module ports
TST designates which DS0s are used for QRSS testing when
activated under the
TEST MENU . When not used for testing, the
TST designation is identical to Idle .
REVIEW TEMP This menu item is operated the same for the
Temp Map as is
3) REVIEW MAP A or MAP B .
EDIT TEMP The map in the Temp file can be edited to
whatever configuration is desired. If Map A
had been copied into the Temp
file, then after
editing, the Temp file could be applied to
MAP A or MAP B . The menu operation is
identical to 2) CREATE TEMP with the
exception that the existing port selections
display.
APPLY TEMP> A(B) Writes the Temp map into MAP A . Apply is
usually the last step in updating a map and is
accessed automatically at the end of editing
or creating a temporary map. Currently, it
can be bypassed by selecting another menu
choice.
Menu Item Description