Proface FP3900 - 19 Flat Panel" - Manual (Page 17)

1.2 Optional Equipment
1-2 FP-2500/FP-2600 Series User Manual
1.2 Optional Equipment
All optional items listed below are Digital Electronics Corporation products.
Item Model Number Description
RS-232C Cable FP61V-IS00-O (5m)
Serial interface cable used for touch panel data
transmission between the host and the FP or
command transmission to the FP. This is a
straight Dsub 9-pin female cable.
Analog RGB Cable
FP-CV00 (2.5m)
FP-CV01 (5m)
FP-CV02-45 (4.5m)
Analog RGB interface cable used when image
signals are output to the FP from the host.
(Dsub 15-pin male).
USB Cable FP-US00 (5m)
USB interface cable used for touch panel data
transfer between the host and the FP or
command transmission to the FP. A-B type
cable.
DVI-D Cable FP-DV01-50 (5m)
Digital Visual Interface cable used to send the
image signal from the host to the FP. XGA
specification DVI-D 24-pin male.
„ „ „ „ „ Cables
„ „ „ „ „Maintenance Parts
Item Model Number Corresponding FP Rev. Description
Installation
Fasteners
GP070-AT01
FP-2500 Series
FP-2600 Series
-
Metal installation
fasteners.
Rubber Gasket GP570-WP10-MS
FP-2500 Series
FP-2600 Series
-
Replacement rubber
gasket, used when
installing the FP. Same as
the FP unit's original
gasket.
Screen Protection
Sheet
PSL-DF00
FP-2500 Series
FP-2600 Series
-
Disposable, dirt resistant
sheet for the FP unit's
screen. The FP unit's
touch panel can be used
with this cover
sheet attached.
(5 sheets/set)
GP577RT-BL00-MS FP-2500 Series -
Replacement backlight for
FP-2500 Series units.
FP2600-T12
Rev.1 is not
marked. *1
FP2600-T42-24V
Rev.1 is not
marked. *1
FP2600-T12
Rev.1 is
marked.
*1
FP2600-T42-24V
Rev.1 is
marked. *1
Replacement backlight for
FP-2600 Series units.
Backlight
PS600-BU00
CA3-BLU12-01
* 1 The corresponding backlight unit differs depending on FP-2600 Series unit's
marked Revision.
For more information on how to determine the revision version,
see "Revision Version" (Page 10).