Proface FP3900 - 19 Flat Panel" - Manual (Page 54)

FP-2500/FP-2600 Series User Manual 4-7
4.2 Screen Display Adjustment
SAVE Saves all the adjusted settings in the EEPROM.
• In the OSD, pressing the button applies the set value and enables
the setting. The set value won't be canceled unless the power is turned
OFF or the value is reset.
If the power is turned OFF without saving the set value, that data will
disappear. The last saved data will be read into the system when the
FP starts. To enable the changed value, be sure to press the
SAVE but-
ton.
• When the OSD automatically closes after 30 seconds of inactivity, the
set value that you were modifying at the time will be retained. If you
quit the OSD using the
button, the value you were modifying will
be ignored and the previously set value will remain in effect.