Proface FP3900 - 19 Flat Panel" - Manual (Page 33)

FP-2500/FP-2600 Series User Manual
2.5 Names and Functions of FP Parts
2-14
A : TFT Color LCD
Displays host data.
B : Touch Panel
Switches screens or writes/sends data to the host.
C : Front LED
Used to indicate status of power supply, backlight
or image signal input.
3.3.2 Status of Front LED in Op-
eration Modes
D : Power Input Terminal Block
Provides power to the FP unit via the input and
ground terminals
E : Dip Switches
Switches for setting up the FP unit's Operation
Mode.
G : Analog RGB Connector
Connector for analog RGB cable.
H : DVI-D Interface Connector
Connector for DVI-D calbe.
I : RS-232C Connector
Connector for RS-232C (serial) interface. Used
sending touch panel data to the host, and receiving
commands from the host.
J : USB Connector
Connector for USB cable. Used for sending touch
panel data to the host, and receiving commands
from the host.
2.5 Names and Functions of FP Parts
A B C
FP-2500 Series Front
FP-2600 Series Front
Rear
Bottom
D E F G H I