Proface FP3900 - 19 Flat Panel" - Manual (Page 82)

FP-2500/FP-2600 Series User Manual 7-11
7.3 Backlight Replacement
5) Disconnect the backlight's one (1) power
connector.
6) Loose the backlight unit attachment screw.
Next, slide the backlight in the direction
shown and lift it forward and remove it
from the FP.
4) The circuit board is connected on one
side, and hinges open.
When the FP unit's power has
just been turned OFF, the circuit
board chassis is still very hot!
Be sure to wear gloves to pre-
vent being burned.
Connector
Attachment Screw