Watlow ANAWIN 2 - Manual (Page 115)

Using the Developer
AnaWin User’s Guide 10-21
Controller Value: Select Controller Value to display a panel of list
boxes that allow you to select a controller value, as shown in Figure 10-
20. Note that the list boxes that appear on the right side of the panel
vary, depending on the type of parameter you select in the bottom left
list box.
FIGURE 10-20 Selecting Controller Value Data
• Use the top left list box to select a controller.
• Use the bottom left list box to select a type of controller data: Chan-
nel Parameter, Global Parameter, Digital Input, or Digital Output.
If you select Channel Parameter, the following additional list boxes
appear:
• Channel: Use the Channel pull-down list box to select a
channel.
• Parameter: Use the Parameter pull-down list box to select a
specific parameter for the selected channel.
If you select Global Parameter, the following additional list box
appears:
• Parameter: Use the Parameter pull-down list box to select a
global parameter for the selected controller.
If you select Digital Input, the following additional list box
appears:
• Input: Use the Input pull-down list box to select an available
input point.
If you select Digital Output, the following additional list box
appears:
• Output: Use the Output pull-down list box to select an
available output point.
Assign Entry To <cell>: Click the Assign Entry To <cell> button to
assign the data you entered or selected using the Number, Formula, or
Controller Value option to the cell selected in the user variable
spreadsheet.