Watlow ANAWIN 2 - Manual (Page 37)

Setting System Parameters
AnaWin User’s Guide 4-9
Disable Recipe Download
Select Disable Recipe Download and set the associated options, shown
in Figure 4-12, to set the software to prevent recipe downloads under the
specified conditions.
FIGURE 4-12 Disable Recipe Download Options
Select a digital input or output and state (high or low), as the condition
that will prevent recipe downloads.
Gauge Display Editable Parameters
Use the Gauge Display Editable Parameters panel, shown in Figure 4-13,
to specify which parameters on the Gauge Display screen are editable.
Place a check mark in the box corresponding to each parameter you
want to be editable.
FIGURE 4-13 Gauge Display Editable Parameters Panel
Communications
From the System menu, select Communications, then Enabled or
Disabled to enable or disable communications with one or more of the
controllers.
When you select Enabled or Disabled, a selection window appears.
From this window, select the controller for which you want to enable or
disable communications, then click OK.
When communication is enabled, the indicator shown in Figure 4-14
appears in the bottom right-hand portion of the screen. This indicates
that AnaWin is communicating with the controller(s).
FIGURE 4-14 Communication Enabled Indicator