Watlow ANAWIN 2 - Manual (Page 41)

AnaWin User’s Guide 5-1
5 Setting Channel
Parameters
This chapter explains how to use the options on the Channel Setup menu
to configure channel parameters and set up ramp soak options. The
Channel Setup menu includes the following options:
• Channel Parameters
• Ramp Soak Setup
The channel parameter and ramp/soak screens simplify and streamline
the task of setting up your controllers. The channel copy feature, for
example, can save you literally hours of tedious data entry. Graphical
displays group related parameters and present them more clearly than is
possible on the controller front panel interface.
Channel Parameters
Select Channel Parameters to display the Channel Setup screen, shown
in Figure 5-1. Use this screen to set the input, output, control, and alarm
parameters for each channel. The Channel Setup screen also includes a
real-time plot screen that displays the process variable and output
variable as you make changes.