Watlow ANAWIN 2 - Manual (Page 31)

Setting System Parameters
AnaWin User’s Guide 4-3
Normal Startup
The Normal Startup panel, shown in Figure 4-3, allows you to specify
what actions will occur when you launch AnaWin.
FIGURE 4-3 Normal Startup Panel on Preferences Screen
You can set one of these three Actions:
• Read Parameters From Controller: Reads the operational parame-
ters from the controller on bootup.
• Send Parameters to Controller: Downloads parameters from
AnaWin to the controller(s). If you select this option, you can either
have AnaWin load the last recipe which was downloaded or any of
the recipes saved on the PC’s hard disk.
• Operator Select on Startup: Prompts the operator to choose to read
parameters from the controller or download a recipe when AnaWin
is launched.
Power Fail Recovery
The Power Failure Recovery panel, shown in Figure 4-4, allows you to
specify how AnaWin will respond after a sudden loss of power. Set a
time limit and appropriate startup actions. If AnaWin is launched within
the time limit, it executes the Under Limit Action. If AnaWin is
launched after the time limit elapses, it executes the Over Limit Action.
FIGURE 4-4 Power Failure Recovery Panel on Preferences Screen