Watlow ANAWIN 2 - Manual (Page 26)

3-4 AnaWin User’s Guide
Exporting Data
The Select Channels to Export panel lists the total number of channels
in the system and the total number of channels currently selected for
export. Click Select Channels to select specific channels from the total.
Select the channels you wish to export, then click OK.
Export Data Now
Click Export Data Now to export data to the selected text file using the
specified export settings.
Data Log Setup
Select Data Log Setup to display the Data Log Settings screen, shown in
Figure 3-3. From this screen, you can set AnaWin to regularly log data
to a database file.
FIGURE 3-3 Data Log Settings Screen
Data Logging Status
The data logging status (ON or OFF) appears at the top of the screen. If
the data logging status is OFF, no continuous data logging will occur.
Set the data logging status to ON, to begin continuous logging.
Logging Interval
Set the frequency of data logging. Setpoint, process variable, and two
output variables for each selected channel are logged according to the
period defined in this field.
Select Channels to Log
The data logging file can include all the channels in the system, or only
some of them, according to your needs. Use this field to select the
channels you want to log.