Watlow ANAWIN 2 - Manual (Page 52)

5-12 AnaWin User’s Guide
Setting Channel Parameters
Edit/View Profile
The Edit/View Profile button allows you to access the Ramp Soak Edit
screen, on which you can view and modify a selected profile.
To display the Ramp Soak Edit screen, follow these steps:
1. Click Edit/View Profile to display the Select File window, shown
earlier in Figure 5-12, from which you can select a profile to edit or
view.
2. Select the file name for the profile you want to edit or view, or type
in a non-existent file name to create a new profile with default val-
ues.
3. Click OK to display the Ramp Soak Edit screen for that profile.
The following section tells you how to use the Ramp Soak Edit screen to
edit profiles.
Editing Profiles
Figure 5-16 shows the Ramp Soak Edit screen. Using this screen—and
other screens and windows that you access from it, you can modify the
profile view displayed on the screen; define segment information—
including triggers and events—for the segments in a profile; and define
a profile’s ready state. When you are done using the Ramp Soak Edit
screen, click Save to save your changes and return to the Ramp Soak
Assignment screen.
FIGURE 5-16 Ramp Soak Edit Screen
The top portion of the Ramp Soak Edit screen displays the profile
view—a graphical view of the selected profile, showing time on the
horizontal axis and process setpoint on the vertical axis. Use the
following controls to modify the profile view:
Spin: Use the buttons in the Spin panel to rotate the profile group Left
or Right. These buttons do not work if Show Segs is selected.