Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 133)

Brocade Mobility Access Point System Reference Guide 123
53-1003100-01
5
3. Select System Profile from the options on left-hand side of the UI.
Expand the Network menu and select IGMP Snooping.
FIGURE 38 IGMP Snooping screen
Set the following parameters to configure general IGMP Snooping values.
Enable IGMP Snooping Select this option to enable IGMP Snooping on the access point. This feature is enabled by default.
Forward Unknown
Multicast Packets Select this option to enable the access point to forward multicast packets from unregistered
multicast groups. If disabled, the Unknown Multicast Forward feature is also disabled for the
selected VLANs. This is enabled by default.