Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 220)

210 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
• Disable A-MPDU Aggregation if the intended vehicular speed is greater than 30 mph. For more
information, see
Radio Override Configuration .
Advanced Profile Configuration
System Profile Configuration
An access point profile’s advanced configuration is comprised of defining connected client load
balance settings, a MINT protocol configuration and miscellaneous settings (NAS ID, access point
LEDs and RF Domain Manager).
To set an access point profile’s advanced configuration:
Select the Configuration tab from the Web UI.
Select Devices.
Select System Profile from the options on left-hand side of the UI.
Expand the Advanced menu item.
The following items are available as advanced access point profile configuration options:
• Advanced Profile Client Load Balancing
• Configuring MINT Protocol
• Advanced Profile Miscellaneous Configuration
Advanced Profile Client Load Balancing
Advanced Profile Configuration
Use the screen to administer the client load across an access point’s radios. Brocade Mobility 7131
Access Point models can have from 1-3 radios depending on the SKU. Brocade Mobility 1220
Access Point, Brocade Mobility 1220 Access PointM, Brocade Mobility 1240 Access Point, Brocade
Mobility 7131 Access Point models have 2 radios, while Brocade Mobility 6511 Access Point have a
single radio.
1. Select Client Load Balancing from the expanded Advanced menu.