Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 754
744
Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
FIGURE 25
RF Domain - Smart RF Details screen
Refer to the Neighbors table to review the attributes of neighbor radio resources available for
Smart RF radio compensations for other RF Domain member device radios. Individual access point
hostnames can selected and the RF Domain member radio can reviewed in greater detail.
Attenuation is a measure of the reduction of signal strength during transmission. Attenuation is the
opposite of amplification, and is normal when a signal is sent from one point to another. If the
signal attenuates too much, it becomes unintelligible. Attenuation is measured in decibels. The
radio's current operating channel is also displayed, as is the radio's hard coded MAC address
transmit power level and administrator assigned ID. Select Refresh at any time to update the
Details screen to its latest values.
11. Select the Energy Graph tab
Use the Energy Graph to review the radio’s operating channel, noise level and neighbor count. This
information helps assess whether Smart RF neighbor recovery is needed in respect to poorly
performing radios.