Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 181)

Brocade Mobility Access Point System Reference Guide 171
53-1003100-01
5
FIGURE 71 Profile Security - Global VPN Settings tab
38. Refer to the following fields to define IPSec security, lifetime and authentication settings:
df bit Select the DF bit handling technique used for the ESP encapsulating header. Options include
clear, set and copy. The default setting is copy.
IPsec Lifetime (kb) Set a connection volume lifetime (in kilobytes) for the duration of an IPSec VPN security
association. Once the set volume is exceeded, the association is timed out. Use the spinner
control to set the volume from 500 - 2,147,483,646 kilobytes. The default settings is 4,608,000
kilobytes.
IPsec Lifetime (seconds) Set a lifetime (in seconds) for the duration of an IPSec VPN security association. Once the set
value is exceeded, the association is timed out. Options include Seconds (120 - 86,400),
Minutes (2 - 1,440), Hours (1 - 24) or Days (1). The default setting is 3,600 seconds.
Plain Text Deny Select global or interface to set the scope of the ACL. The default setting is global, expanding the
rules of the ACL beyond just the interface.