Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 842)

832 Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
Temperature is measured in centigrade. The table displays the Current Temperature
(centigrade) and a 20 Minute Average Temperature (centigrade). Compare these two items
to determine whether the AP8132’s deployment location remains consistently heated. For
more information on enabling the sensor, see Environmental Sensor Configuration on
page 5-221.
9. Refer to the Temperature Trend Over Last Hour graph to assess the fluctuation in ambient
temperature over the last hour. Use this graph in combination with the Light and Motions
graphs (in particular) to assess the deployment area’s activity level.
10. Refer to the Temperature Trend Over Last Day graph to assess whether deployment area
temperature is consistent across specific hours of the day. Use this information to help
determine whether the AP8132 can be upgraded or powered off during specific hours of the
day.
11. Select the Motion tab.
FIGURE 93 Access Point - Environmental Sensor screen (Motion tab)
12. Refer to the Motion table to assess the sensor's detected movement within the AP8132’s
immediate deployment area.