Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 672
662
Brocade Mobility Access Point System Reference Guide
53-1003100-01
12
4. Optionally select Cancel (from the lower, right-hand corner of the screen) to cancel the upgrade
of devices under the selected RF Domain. The Cancel button is enabled only if there are device
undergoing upgrade and they are selected for cancellation.
Select the Upgrade History tab to review an Upgrade History of access point upgrade operations.
FIGURE 26
AP Upgrade screen - Upgrade History screen
5. Refer to the following to assess devices impacted by upgrade operations and their upgrade
status:
Upgrade Time
Displays whether the upgrade is immediate or set by an administrator for a
specific time. This is helpful to ensure a sufficient number of devices remain in
service at any given time.
Reboot Time
Displays whether a reboot is immediate or time set by an administrator for a
specific time. Reboots render the device offline, so planning reboots carefully is
central to ensuring a sufficient number of devices remain in service.
Last Status
Lists the last reported upgrade and reboot status of each listed in progress or
planned upgrade operation.
Upgraded By
Lists the model of the controller, service platform or access point RF Domain
manager that’s provisioning the image to the listed device.
Hostname
Displays the hostname of the access point, if configured.
Device Model
Displays the type of access point upgraded.
MAC Address
Displays the primary MAC (or hardware identifier) for each device impacted by an
upgrade operation.