Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 367
Brocade Mobility Access Point System Reference Guide
357
53-1003100-01
5
NOTE
VRRP support is available only on Brocade Mobility 7131 Access Point model access point, and is
not available on Brocade Mobility 6511 Access Point, Brocade Mobility 1220 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 1240 Access Points.
To define the configuration of a VRRP group:
1. Select the Configuration tab from the Web UI.
Select Device Overrides from the Device menu to expand it into sub menu options.
Select a target device from the device browser in the lower, left-hand, side of the UI.
2. Select VRRP.
FIGURE 196
Device Overrides - VRRP screen - VRRP tab
3. Review the following VRRP configuration data to assess if a new VRRP configuration is required
or if an existing VRRP configuration requires modification or removal:
Virtual Router ID
Lists a numerical index (from 1 - 254) used to differentiate VRRP configurations. The index is
assigned when a VRRP configuration is initially defined. This ID identifies the virtual router a packet
is reporting status for.