Loginconfiguration, Load, Ipinterfaceid – Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) User Manual
Page 113
Brocade Virtual ADX XML API Programmer’s Guide
103
53-1003248-01
Data structures
3
load
This structure is the high-level description of any load on the device.
LoginConfiguration
This structure is a high-level description for login authentication configuration.
IPInterfaceID
This structure is a high-level description for IP interface.
TABLE 251
Attributes
Name
Type
Required
Rules
Description
percentLoad
Float
Yes
The percentage of load on the
device.
secondsSince
Long
Yes
The number of seconds since
the average or peak load on the
device.
TABLE 252
Attributes
Name
Type
Presence
Rules
Description
defaultAuthMethodList
[] Mandatory
This parameter specifies the
default authentication method
list for user login.
enablePrivilegeMode
boolean
Mandatory
This parameter enables the ADX
to take the user to the privilege
mode after successful
authentication.
TABLE 253
Attributes
Name
Type
Presence
Rules
Description
name
string
Interface name.
portString
string
The interface port string. For
example, Ethernet “1” or “1/1” ;
Loopback “lb1” or “lb2”;
Virtual “ve1” or “ve2”;
Management “mgmt1” only.
interfaceType
The interface type.
slot
unsignedInt
The interface slot number.
port
unsignedInt
The interface port number.