Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 806)

796 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
SNMP_MISSING_AUTHENTICATION_TYPE_PARAM The parameter authentication type for the user "%s" is
missing. Please specify a valid authentication type
parameter.
SNMP_MISSING_COMMUNITY_STRING_ACCESS_LEV
EL The mandatory parameter accessLevel is missing for the
community string "%s". Please specify the mandatory
parameter access level.
SNMP_MISSING_COMMUNITY_STRING_NAME The community string name is missing. Please specify a
valid community string name.
SNMP_MISSING_GROUP_NAME The mandatory parameter group name is missing. Please
specify a valid SNMP group name.
SNMP_MISSING_INTERFACE_TYPE The mandatory parameter interfaceType is missing.
Please specify a valid interfaceType parameter.
SNMP_MISSING_MIB_SUBTREE_PARAM The parameter MIB subtree for the view "%s" is missing.
Please specify a valid MIB subtree parameter.
SNMP_MISSING_PORT_RANGE_PARAMETER One of the port range parameters is missing. Please
specify both beginPort and endPort parameters.
SNMP_MISSING_PRIVACY_PASSWORD_PARAM The parameter privacy password for the user "%s" is
missing. Please specify a valid privacy password
parameter.
SNMP_MISSING_PRIVACY_TYPE_PARAM The parameter privacy type for the user "%s" is missing.
Please specify a valid privacy type parameter.
SNMP_MISSING_SECURITY_LEVEL The mandatory parameter security level with the security
model "%s" for the %s "%s" is missing. Please specify a
valid security level parameter.
SNMP_MISSING_SECURITY_MODEL The mandatory parameter security model for the group
"%s" is missing. Please specify a valid security model
value.
SNMP_MISSING_SOURCE_INTERFACE The mandatory parameter source interface is missing.
Please specify a valid source interface.
SNMP_MISSING_TRAP_RECEIVER_HOST_IP The mandatory parameter trap receiver host name or IP
address is missing. Please specify a valid host name or IP
address.
SNMP_MISSING_USER_AUTHENTICATION_PARAM The user authentication parameters security level or
username for the host "%s" is missing. Please specify the
valid user authentication parameters.
SNMP_MISSING_USER_NAME The mandatory parameter user name is missing. Please
specify a valid SNMP user name.
SNMP_MISSING_VIEW_NAME The mandatory parameter view name is missing. Please
specify a valid SNMP view name.
SNMP_MISSING_VIEW_TYPE_PARAM The mandatory parameter view type for the view "%s" is
missing. Please specify a valid view type parameter.
SNMP_NO_TRAP_RECEIVERS_CONFIGURED There are no trap receivers configured. Please specify an
existing trap receiver.
SNMP_PORT_RANGE_MISMATCH The specified port range parameters are invalid. Please
specify the endPort parameter greater than or equal to
beginPort parameter.
TABLE 109 List of error messages
Error String Message