Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 668)

658 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
6
AclInterfaceConfig
This structure is a high-level description of ACL IP Interface level configuration.
AclMaxFragmentRate
This structure is a high-level description of the ACL maximum fragment rate.
TABLE 254 Attributes
Name Type Presence Rules Description
id InterfaceID Mandatory The IP interface.
enableDropFragmentOnMatch boolean Optional Enables or disables the
automatic drop of a
fragment whose source
and destination IP
addresses exactly match
an ACL entry that
contains layer 4
information, even if the
ACL entry’s action is
permitted.
enableCpuFragmentFiltering boolean Optional Enables or disables the
CPU filtering of packet
fragments.
deniedTrafficRedirectionPort string Optional Only ethernet
interface is
supported, for
example., Ethernet
“1” or “1/1”.
When zero is
specified it will
disable copying
denied traffic to a
mirror port. Copying denied traffic to
a mirror port for
monitoring.
maxCamEntries unsignedInt Optional Valid range is from
10 to 2048.
The default value
depends on the
device. Maximum number of
CAM entries.
TABLE 255 Attributes
Name Type Presence Rules Description
systemThreshold unsignedInt Optional The valid value
range is from 600
to 12800. The
default value is
6400. Sets the threshold
for the entire
device.
systemExceedAction aclSummaryFilterFieldEnum Optional This parameter is
mandatory when
the
systemThreshold
parameter is
present. Specifies the
action to take if
the system level
threshold (<num>
parameter) is
exceeded.