Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 777)

Brocade Virtual ADX XML API Programmer’s Guide 767
53-1003248-01
List of Error Messages
A
SLB_CONTENT_CHECK_ARRAY_FAIL_ON_UDP_BOUN
D_PORT The content-check array cannot be configured on a UDP
bound port. Please specify a port which is not bound to
the UDP port.
SLB_CONTENT_CHECK_FAIL_FOR_KNOWN_PORTS The content-check cannot be configured for "known"
ports. Please specify only the "unknown" ports for the
content-check configuration.
SLB_CONTENT_CHECK_NAME_EMPTY The specified content-check name parameter is empty.
Please specify a valid content-check name.
SLB_CONTENT_CHECK_NOT_ALLOWED The content-match or content-check is already configured.
However, only content-match or content-check is allowed
for each port. Please remove the existing content-check
or content-match configuration before you re-configure
content-match or content-check.
SLB_CONTENT_CHECK_NOT_ALLOWED_ON_CONTEN
T_ARRAY The content-check or content-check array is already
configured. Only content-check or content-check array is
allowed for each port. Please remove the existing
content-check array or content-check configuration before
you re-configure content-check or content-check array.
SLB_CONTENT_CHECK_TOO_LONG_79 The specified content-check name parameter has
exceeded the maximum number of characters allowed.
Please specify the content-check name that is not more
than 79 characters.
SLB_CONTENT_MATCH_STILL_BOUND_SERVER_POR
T The content match name is already bound to the server
port. Please unbind the content match name from the
port before setting the content protocol.
SLB_CSW_CAN_NOT_SET_GOTO_OR_DELIMIT_AS_D
EFAULT The action 'GOTO' or 'DELIMITER' cannot be configured as
the default action. Please specify another default action.
SLB_CSW_CAN_NOT_SET_REWRITE_AS_DEFAULT The specified policy "%s" cannot be configured with
'REWRITE' as the default action. Please specify another
valid default action.
SLB_CSW_CC_L7_CONNECTIONS_OUT_OF_RANGE The concurrent Layer 7 connections count is out of range.
Please specify a concurrent Layer 7 connections count
value in the range of 100000 to 160000. On a Brocade
Virtual ADX chassis device, the range is from 100000 to
20480000.
SLB_CSW_FAIL_ADD_KEY_TO_DATABASE An error was encountered while adding the key to the
database for rule "%s". Please specify a rule with a valid
PREFIX or SUFFIX.
SLB_CSW_FAILED_ACTION_RULE_ALLOCATION The memory allocation for the new rule action has failed.
Please release the unused rules from memory first.
SLB_CSW_INVALID_CONFIG_DEFAULT_ACTION The rewrite action is not supported on the default rule.
Please do not specify a rewrite action.
SLB_CSW_INVALID_CONFIG_DEFAULT_ACTION_ALRE
ADY_BOUND The default action "%s" is already bound to the policy.
Please unbind the default action before you can change
the configuration.
SLB_CSW_INVALID_CONFIG_DEFAULT_ACTION_DELE
TE The specified policy "%s" does not have a default rule to
delete. Please specify a valid CSW Policy.
TABLE 109 List of error messages
Error String Message