Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 134)

124 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
SourceIP
This structure is the high-level description of any source IP that is needed to be configured for the
Brocade Virtual ADX switch.
SshConnectionFilter
This structure is a filter which consist of simple and can also add other complex types later.
precision string Optional Specifies the precision.
referenceTime string Optional Specifies the reference time in
milliseconds.
clockOffset string Optional Specifies the clock offset in milliseconds.
rootDelay string Optional Specifies the root delay in milli seconds.
rootDispersion string Optional Specifies the root dispersion in
milliseconds.
peerDispersion string Optional Specifies the peer dispersion in
milliseconds.
pollingInterval unsignedInt Optional Specifies the SNTP Polling interval in
seconds.
TABLE 304 Attributes
Name Type Required Rules Description
sourceIPType sourceIPTypeEnum Optional The type of source IP (Source IP or
Source NAT IP or Source Standby IP).
IP string Optional The IP address.
subnetMask string Optional The IP subnet mask.
subnetMaskLength unsignedInt Optional The length of the IP subnet mask.
defaultGatewayIP string Optional The default gateway IP address.
portRange portRangeEnum Optional The valid values are between 1 and 2. The
port range.
enablePortAllocatio
nPerRealServer boolean Optional Enables or disables port allocation per real
server.
TABLE 305 Attributes
Parameters Type Presence Rules Description
simpleFilter SshConnectionSimpleFilter Optional Simple filter
TABLE 303 Attributes
Name Type Required Rules Description