Portstatusenum, Portspeedenum, Portspeedgigabitmodeenum – Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) User Manual
Page 350: Portrangeenum
340
Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
4
portRangeEnum
This type of data describes the enumerations for port ranges.
portSpeedEnum
This type of data describes the enumerations for port speeds.
portSpeedGigabitModeEnum
This are the enumerations for port speed gigabit mode.
portStatusEnum
This data describes the enumerations for port status.
TABLE 832
Attributes
Parameters
Description
LOWER
Lower port range
HIGHER
Higher port range
TABLE 833
Attributes
Parameters
Description
10_MEGABIT
The port speed is 10 Mbps
100_MEGABIT
The port speed is 100 Mbps.
1_GIGABIT
The port speed is 1000 Mbps.
10_GIGABIT
The port speed is 10000 Mbps.
UNKNOWN
The link on the primary trunk port is down.
TABLE 834
Attributes
Parameters
Description
MASTER
Master
SLAVE
Slave
TABLE 835
Attributes
Parameters
Description
UP
The port is up.
DISABLED
The port is disabled.
DOWN
The port is down.
EMPTY
No device is installed in the port.
DOWN_RFN
Remote Fault Notification (RFN) is disabled.