Stpdetailinfo – Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) User Manual
Page 314
304
Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
4
StpDetailInfo
This is a high-level description of an STP detail information.
designatedBridge
string
Optional
The MAC address of the designated
bridge to which this port is connected.
The designated bridge is the device that
connects the network segment on the
port to the root bridge.
designatedPort
string
Optional
The port number sent from the
designated bridge.
designatedPathCost string
Optional
The cost to the root bridge as advertised
by the designated bridge that is
connected to this port. If the bridge is
the root bridge itself, then the cost is 0.
The identity of the designated bridge is
shown in the designated bridge field
activeTimer
Optional
Active STP timer.
bpduSent
string
Optional
The number of Bridge Protocol Data
Units (BPDUs) sent.
bpduReceived
string
Optional
The number of BPDUs received.
TABLE 744
Attributes
Name
Type
Presence Rules Description
bridgeIdentifier
String
activeSTP
String
activeGlobalTimer
stpInfo
StpInfo
TABLE 743
Attributes (Continued)
Name
Type
Presence Rules
Description