Snmpviewtypeenum, Sntpassociationfilterfieldenum, Sntpclockstatusenum – Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) User Manual
Page 171: Snmpviewfilterfieldenum
Brocade Virtual ADX XML API Programmer’s Guide
161
53-1003248-01
Enumerations
3
snmpViewFilterFieldEnum
This structure is a high-level description of SNMP view filter field enumerated list.
snmpViewTypeEnum
This structure is a high-level description of SNMP view type enumerated list.
sntpAssociationFilterFieldEnum
This structure is a high-level description of sntp configuration status filter field enumerated list.
sntpClockStatusEnum
This structure is a high-level description of sntp configuration status enumerated list.
TABLE 401
Attributes
Parameters
Description
VIEW_NAME
Name of the SNMP view.
MIB_SUBTREE_OID
MIB subtree.
VIEW_TYPE
Identifies whether the specified mibSubtreeName is included or
excluded in the view.
TABLE 402
Attributes
Parameters
Description
VIEW_INCLUDED
View included.
VIEW_EXCLUDED
View excluded.
TABLE 403
Attributes
Parameters
Description
PEER_IP_ADDRESS
Specifies the IP address of the peer.
REF_CLOCK_PEER_IP_ADDR
Specifies the IP address of the peer’s reference clock
VERSION
Specifies the SNTP version.
TABLE 404
Attributes
Parameters
Description
CONFIGURED_AND_SYNCHRONIZED
Configured and Synchronized to this peer.
CONFIGURED
Peer is statically configured.
UNSYNCHRONIZED
Peer is not synchronized.