Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 334)

324 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
4
Enumerations
accessListEnum
This type of data describes the enumerations for an access list.
arpTypeEnum
This type of data describes the enumerations for types of ARP entries.
value string Optional Ignored when the
“operator” value
is “RANGE”. The value of the field for
filtering.
startValue string Mandatory This parameter is
mandatory and
considered only
when “operator”
value is “RANGE”. Start value in a range.
endValue string Mandatory This parameter is
mandatory and
considered only
when “operator”
value is “RANGE”. End value in a range.
TABLE 779 Attributes
Parameters Type Presence Rules Description
TABLE 780 Attributes
Members Description
INBOUND The inbound ACL type
OUTBOUND The outbound ACL type
TABLE 781 Attributes
Parameters Description
DYNAMIC The switch learned the entry from an incoming packet.
STATIC The switch loaded the entry from the static ARP table when the device for the entry was connected to
the switch.
PENDING The ARP entry will be in Pend (pending) status until traffic with the matching IP-to-MAC is received on
a port.
INVALID An invalid ARP entry.
OTHER ARP state is not pending, static, dynamic, or invalid.