LumaSense Technologies INNOVA 1303 - Manual (Page 20)

Chapter 2
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 20 of 60
Fig.2.8. Attaching sampling and dosing tubing to the 1303’s mounting
stubs
1. Remove the knurled nut from the mounting stub of the sampler
channel you wish to use, on the front panel of the 1303.
2. Push one end of the length of the nylon AF0006 or Poly Tetra Fluoro
Ethylene PFTE AF0614 tubing through the non-threaded end of the
nut.
3. Push the end of the tubing onto the mounting stub as far as it will
go, and secure the tube by re-tightening the knurled nut onto the
threads of the mounting stub.
To connect dosing tubing:
Proceed as described above, using the nylon tubing AF0005.
2.3.2 Connecting External Filters to the Sampling Tubes
The external filters, comprising filter, LumaSense accessory number
DS2306, and fitting, LumaSense accessory number UD5041 (optional
accessories), protect the 1303’s sampling airways from airborne parti-
cles such as dust, thus helping to prevent blockage of the airways. Al-