LumaSense Technologies INNOVA 1303 - Manual (Page 51)

Chapter 4
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 51 of 60
Section 2.3 Source Handshake (SH) Interface Function, (Clause
6)
SH 1 – complete capability
Section 2.4 Acceptor Handshake (AH) Interface Function, (Clause
7)
AH 1 – complete capability
Section 2.5 Talker (T) Interface Function, (Clause 8)
T 5 – basic talker, serial poll, talk only mode, un-
address if MLA
Section 2.6 Listener (L) Interface Function, (Clause 9)
L 3 – basic listener, listen only mode, un-address if
MTA
Section 2.7 Service Request (SR) Interface Function, (Clause 10)
SR 1 – complete capability
Section 2.9 Parallel Poll (PP) Interface Function, (Clause 12)
PP 1 – complete capability
Section 2.10 Device Clear Interface Function, (Clause 13)
DC 1 – complete capability
All other functions – no capability
For further details of the above functions refer to the relevant section of
the IEEE or IEC standards.
4.2 Overview of 1303 Interface Jobs
In this section, each 1303 interface job is grouped according to its func-
tion, with a short description of its effect. The correct syntax for each
job is given, with the minimum code for each job-header, in bold up-
per-case characters. The data for input jobs can be in NR1, NR2 or NR3
format, unless specifically stated otherwise. The data for output jobs is
in NR2 format unless specifically stated otherwise.