GW Instek GDS-122 User Manual - Manual (Page 30)

Using the Oscilloscope
59
Select line display DISP SET→F1(Type)
Select persistency DISP SET→F2(Persist)
Select display format DISP SET→F3(Format)
Select display save format DISP SET→F4(Carry)
56B
Wave Save
CH1
Source
A
Wave
WAVE SAVE Save
OFF
Show
Math
CH2
D
C
B ON
F1 F2 F3 F4
Select source channel WAVE SAVE→F1(Source)
Select waveform ID WAVE SAVE→F2(Wave)
Save waveform WAVE SAVE→F3(Save)
Turn waveform display on or off WAVE SAVE→F4(Show)
57B
System Status
Horizontal Vertical SYS STAT Trigger Misc
F1 F2 F3 F4
Show horizontal settings SYS STAT→F1(Horizontal)
Show vertical settings SYS STAT→F2(Vertical)
Show trigger settings SYS STAT→F3(Trigger)
Show serial number SYS STAT→F4(Misc)
GDS-122 User Manual
60
58B
OSC OPTION key
OSC
OPTION
UP
DOWN
RIGHT LEFT
Press the OSC OPTION key repeatedly. The
menu message appears in the lower half of
the display and the functionalities of four
keys, UP, DOWN, RIGHT, LEFT, change
accordingly.
: CH1/CH2 horizontal position
: CH1 vertical position
: CH1/CH2 horizontal position
: CH2 vertical position
: CH1/CH2 horizontal position
: Trigger vertical position
: horizontal scale
: CH1 vertical scale
LEFT/RIGHT - Time
UP/DOWN - CH1 Zero
LEFT/RIGHT - Time
UP/DOWN - CH2 Zero
LEFT/RIGHT - Time
UP/DOWN - Trig
LEFT/RIGHT - Time Base
UP/DOWN - CH1 Volts\Div
LEFT/RIGHT - Time Base
UP/DOWN - CH2 Volts/Div
: horizontal scale
: CH2 vertical scale
(Math mode)
– Time
– CHMath
Volts/Div
(Math mode)
: Math horizontal position
: Math vertical position
(Cursor mode)
– Time
– Cursor 1/2
(Cursor mode)
: CH1/CH2 horizontal position
: Cursor 1/2 vertical position