GW Instek GDS-122 User Manual - Manual (Page 41)

Using the Oscilloscope
81
3. Select the View Setting.
Redraw graph according to sample data:
The GDS‐122 refreshes the waveform and
adjust its scale before printing. The most recent
data can be taken, but might take time for
refreshing.
Graph zoom in and out
The existing waveform is used with its scale
adjusted. Since retrieving the data is not
involved, fast printing is ensured.
4. Open the print preview by
selecting File > Print Preview
from the menu or clicking the
Print Preview icon on the
toolbar. Make sure that the
waveforms are placed
appropriately.
Printing out Print out the waveform in one of the following
ways.
• Selecting File > Print in the
Print Preview screen menu
• Selecting File > Print from the
software menu
• Pressing the shortcut keys, Ctrl + P
• Clicking the Printer icon on
the Toolbar
GDS-122 User Manual
82
68B
Accessing the Help
Overview The Help file describes how to install and use the
software. The About screen shows the software
version.
Opening the
Help
Open the Help in separate file using one of the
following methods.
• Selecting Help > Help from the
menu
• Clicking the Help icon on the
Toolbar
• Pressing the shortcut key, F1
• Selecting the Help documentation from the
startup menu
Software version To view the software version,
select Help > About from the
menu. The software version
screen appears.