Jenway 6850 - Manual (Page 28)

28
6.3.1 Selecting the Unit of Measurement
The unit of measurement can be selected by pressing the function key below the Unit option. The
required unit of measurement can then be selected from the available options of IU, mM/L, M/L,
μg/mL, mg/mL, mg/L, mEq, ppb, ppm, % and other. Press the Enter key to confirm.
6.3.2 Quantitation Table Settings
The quantitation table settings are accessed by
pressing the function key below the Curve Fit option in
the quantitation mode screen. Four new options are
available in the quantitation table screen:
4. Method (Change the curve fit algorithm)
5. Params (Enter linear regression constants)
6. Standard (Edit calibration table data)
7. Show Curve (Display calibration curve)
6.3.2.1 Select Curve Fit
The curve fit algorithm can be selected by pressing the
function key below the Method option. Four curve fit
options are available:
1. Linear Fit
2. Square Fit (Quadratic)
3. Cubic Fit
4. Linear Fit Through Zero
The required option can be selected using the up and
down arrow keys. Press the Enter key to confirm.