Jenway 6850 - Manual (Page 35)

35
7.6 SPECTRUM SEARCH
The photometric values of the measured spectrum can
be viewed by pressing the function key below the
Search option. The user can press the up and down
arrow keys to move between the peaks in the scan that
are above the threshold peak height. The user can
alternatively press the left or right arrow keys to review
each point in the scan in turn.
The peak height threshold can be adjusted by pressing
the function key below the PK Height option. The
threshold peak height value can be entered using the
numeric keypad. Press the Enter key to confirm.
7.7 SPECTRUM SMOOTHING
The measured spectrum scan can be smoothed by
pressing the function key below the Smooth option.
7.8 STORING RESULTS
A result file can b e saved to the instrument’s internal
memory.
Press the Save key on the instrument keypad. The
instrument will ask the user to enter a filename (max. 8
characters) using the alpha-numeric keypad. The user
can select the indicated letters, numbers and symbols
by repeatedly pressing the key until the required value
is displayed, after a short period the next character can
be entered in the same manner. Once the filename has
been entered, press the Enter key to confirm.