Jenway 6850 - Manual (Page 43)

43
9.6 RESET MODE SETTINGS
The DNA/Protein mode settings can be reset to their default values by pressing the function key
below the Default option.
9.7 DNA/PROTEIN MEASUREMENTS
Ensure that a cuvette containing the blank solution is in
the reference position in the sample chamber and
insert the cuvette containing the sample solution into
the sample position. Close the instrument lid and pres
the Start/Stop key on the keypad. Once the
measurement is complete the determined results will
be displayed in the DNA/Protein mode screen. Further
samples can be measured in a similar manner.
9.8 STORING METHODS/RESULTS
A method/ result file can be saved to the instrument’s
internal memory.
In the DNA/Protein mode screen press the Save key on
the instrument keypad. The instrument will ask the user
to enter a filename (max. 8 characters) using the alpha-
numeric keypad. The user can select the indicated
letters, numbers and symbols by repeatedly pressing
the key until the required value is displayed, after a
short period the next character can be entered in the
same manner. Once the filename has been entered,
press the Enter key to confirm.