Jenway 6850 - Manual (Page 31)

31
6.5 STORING A STANDARD CURVE
A standard curve can be saved t o the instrument’s
internal memory to allow it to be recalled for future use.
In the calibration table screen press the Save key on
the instrument keypad. The instrument will ask the user
to enter a filename (max. 8 characters) using the alpha-
numeric keypad. The user can select the indicated
letters, numbers and symbols by repeatedly pressing
the key until the required value is displayed, after a
short period the next character can be entered in the
same manner. Once the filename has been entered,
press the Enter key to confirm.
6.6 RECALLING A STORED STANDARD CURVE
A standard curve can be opened from the instrument’s
internal memory to allow it to be re-used for sample
quantification.
In the calibration table screen press the Open key on
the instrument keypad. The user can select from the list
of stored files by pressing the up and down arrow keys.
Once the required file has been located press the Enter
key to confirm.
6.7 SAMPLE MEASUREMENTS
The user should ensure that the appropriate standard curve data has been measured or recalled and
that the instrument is displaying the quantitation mode screen before performing a sample
measurement.