Jenway 6850 - Manual (Page 48)

48
SECTION 12
– ACCESSORIES AND SPARE PARTS
11.1 OPTIONAL ACCESSORIES
Part Code Description of Accessory
685 204 10 x 10mm path length cuvette holder
685 131 Water heated 10 x 10mm single cuvette holder
685 005 10 to 100mm adjustable path length cuvette holder
685 304 Micro-cuvette holder
685 401 8 position automatic cell changer
035 088 Visible calibration set
035 091 UV/Visible calibration set
060 422 Moulded cuvette rack for 16 10x10mm cuvettes
035 143 Pack of 100 disposable micro- cuvettes (70μl)
685 035 Prism PC software CD and security dongle
685 040 Dust cover
11.2 INSTALLING THE PASSIVE AND ACTIVE ACCESSORIES
There are two types of accessories which can be fitted in the sample chamber – passive or active
accessories. The range of passive accessories includes 10 x 10mm cuvette holders, water heated
cuvette holders, adjustable path length (10 to 100 mm) cuvette holders and micro-cuvette holders.
The active accessory is an 8 position automatic cell changer. The instrument must be turned off
before any accessories are fitted.
11.2.1 Passive Accessories
Unscrew the two fixing screws to undo the
passive accessory. Lift out the passive
accessory. To fit a different passive accessory
place the accessory in the correct orientation and
re-tighten the two fixing screws to fix in place.
To replace the passive accessory with an active
accessory refer to section 11.2.2.
Fixing
screws