Hold the reading, Hold the maximum value – KANOMAX 6501 series Climomaster User Manual
Page 20
19
Hold the Reading
While measuring (in NORMAL Mode),
press the
key to hold the current
reading. This is applicable in both the
flow rate and pressure measurement
screens as well.
The ”HOLD” indicator appears on the
display to indicate that the reading
shown is held.
Press
again to release.
Hold the Maximum Value
While measuring (NORMAL Mode),
press and hold
.
The “HOLD” indicator appears on the
display. As long as you keep pressing
down the
button you can hold the
maximum value of each parameter (air
velocity, air temperature, humidity and
pressure).
When you release
, the reading
shown will be frozen. Press
again
to release.
'12/04/12
a
15:40:23 ~
TC
C
1
HOLD
0.87f
25.3e
64.1g
'12/04/12
a
15:40:23 ~
TC
C
1
0.87f
25.3e
64.1g
'12/04/12
a
15:40:23 ~
TC
C
1
HOLD
0.87f
25.3e
64.1g
'12/04/12
a
15:40:23 ~
TC
C
1
0.87f
25.3e
64.1g
■
Humidity is only
available on
MODEL6531/6533.
■
Air temperature is
only available on
MODEL6531/6541
/6542/6533/6543/
6561.
■
Pressure is only
available on
MODEL6501-B0/-C0.