KANOMAX 6501 series Climomaster - Manual (Page 9)

8 Part Names and Functions
Touch Panel
MENU Key
Enters the Main Menu to select a function.
*Press the MENU Key to CANCEL out of the current measurement or
settings and return to the Main Menu.
START/HOLD Key
This key will start and stop the calculation and/or measurement. It
also functions as a hold key during measurements.
MODE Key
You can select the measurement
mode
SET Key
Press the key to execute the selected item.
MENU aa 1.NORMAL
aaaaaa 2.DUCT a TYPE
aaaaaa 3.CALCULATION
aaaaaa 4.FLOW a RATE
aaaaaa 5.DATA a OUTPUT
aaaaaa 6.DATA a CLEAR
aaaaaa 7.UTILITY
aaaaaa 8.PRESSURE a ZERO
▲ ▼ Navigation Keys
1. In Normal Mode, this key allows you to select
the time constant (1, 5, or 10 sec)
(TC1→TC5→TC10)
TC1: Displays the instantaneous value
at every 1 second
TC5: Displays the moving average for 5 sec
TC10: Displays the moving average for 10 sec
2. In the Main Menu, press these keys to scroll in
the desired direction
* 1 Air temperature is only available on
MODEL6531/6541/6542/6543/6533/6561.
* 2 Humidity is only available on MODEL6531/6533.
* 3 Pressure is only available on MODEL6501-B0/6501-C0
*1
*2
Air Flow
Air Temp.
Humidity
Air Velocity
Air Temp.
Humidity
Pressure *3
……………………
……………
………
……………
………
…………
…………………
……
Normal Measurement Mode
To input duct shape and size
Calculation Mode
To measure flow rate
To output stored data
To delete stored data
To set the date, time and units
Zero point adjustment
■ Zero point adjustment is only available on
MODEL6501-B0/-C0.