KANOMAX 6501 series Climomaster User Manual
Page 25
24 Measuring Max, Min, and Mean: CALCULATION Mode
<READY>
The instrument is ready for measuring.
Press
to change the applied
parameters. (Air Velocity, Air Temp,
Humidity – Flow Rate, Air Temp,
Humidity – Pressure)
Press
to start.
<While Measuring>
Press
to stop.
If you have selected “YES” for “4. DATA
STORAGE?”, the measured data will be
stored.
Pressing
will also stop the
measurement but the data will not be
saved.
<RESULT>
After all the trials are finished, the
calculated results will be displayed.
Press
to check each parameter
in the following sequence: Air Velocity
(or Air Flow) Air Temp. Humidity
Dew Point Temperature (DT),
Discomfort Index (DI).
*
If you measured Pressure, only Pressure will be displayed.
Press
to return to the setup menu of the CALCULATION Mode.
Press
to return to the Main Menu. If YES is selected for “DATA
STORAGE”, the results will be stored.
Related Functions:
■
If a printer is connected, press
to print out the results.
■
To recall stored data → P.
■
Print out → P.34
■
What is Dew Point Temperature (DT) and Discomfort Index (DI)?
→
'12/04/12
a
15:40:23 ~
RDY.
N
222
1
/
22
50
0.87f
25.3e
64.1g
■
Humidity is only
available on
MODEL6531/6533.
■
Air temperature is
only available on
MODEL6531/6541
/6542/6533/6543/
6561.
'12/04/12
a
15:42:57 ~
SMP .
N
222
3
/
22
50
2.11f
25.3e
64.2g
2222
CALCULATION
MAX
AVG
MIN
2.76f
1.43f
0.81f
■
Pressure is only
available on
MODEL6501-B0
/-C0.