KANOMAX 6501 series Climomaster - Manual (Page 34)

33
<Setting the CALCULATION RANGE>
You can select the range of calculation.
If the data range is correct, press
to calculate the range of data
displayed on the screen.
If the range is not correct, press to
display a cursor on “START”.
Use to select the first number of
the data (START) that is to be calculated
and press .
The cursor will move to “END”. Use to select the number of
the last data (END) that is to be calculated and press .
Press to calculate for the displayed
data range.
*You CANNOT set more than one range.
<In FLOW RATE Mode>
Press to shift the calculation results in the following
sequence: Flow RateAir TemperatureHumidityAir Velocity.
<In CALCULATION Mode>
Press to shift the calculation results in the following sequence:
Air Velocity (Flow Rate)Air TemperatureHumidityDew Point
Temperature, Discomfort Index.
Press to return to PAGE SET.
Press
to return to the MAIN MENU.
START:00 100 END:050
NUM. 0 m/s 0000 °C 000 %RH
001 00 0.81 00 25.4 00 64.7
002 00 0.95 00 25.4 00 64.7
003 00 0.98 00 25.6 00 64.9
004 00 1.05 00 25.7 00 65.1
005 00 1.21 00 25.7 00 65.0
006 00 0.99 00 25.9 00 65.2
aNEXT1 FLOW 2 RATE
MAX
AVG
MIN
106433a
0 85134a
0 66797a