Set authentication properties for default web site, E 3-34, E 3-35 – Innotech eServer User Manual
Page 56
Advertising
eServer Setup and Site Installation Instructions
Page 56
© Mass Electronics Pty Ltd 2009
Edition 5.0 dated 07/01/2014
Set physical location path for Default Web Site to be
c:\MyWebPages, as illustrated below in Figure
3-34. Click
OK to save and exit.
Figure 3-34: Configure Physical Path for c:\MyWebPages
Set the Authentication properties for the Default Web Site. Select
Default Web Site and click on the
Authentication icon, as illustrated below in Figure 3-35.
Figure 3-35: Set Authentication properties for Default Web Site
Advertising