Innotech eServer - Manual (Page 93)

Page 93
eServer Setup and Site Installation Instructions
© Mass Electronics Pty Ltd 2009 Chapter 4 – Configuring eServer Communications
Select the Crystal Reports Web Components installation program, and double-click to launch. From
the welcome screen, click Next to commence installation, as illustrated below in Figure 4-29.
Figure 4-29: Launch the Crystal Reports Web Components installer
4-5.3 Setup Crystal Reports Software on eServer Client Computer
4-5.3.1 Overview
eServer 1.20 or greater supports the generation of Crystal Reports. This requires the installation of
the Crystal Reports Web Components software on the eServer Client computer.
4-5.3.2 Manual Installation of Crystal Reports Web Components
The Crystal Reports Web Components software is only required for eServer Client computers which are connecting to
an eServer 1.20 or greater and are requesting the generation of Crystal Reports. Note that the Crystal Reports Web
Components are necessary for the generation of Crystal Reports using the Innotech ATOM software.
Installation of the Crystal Reports Web Components can be done during site commissioning; alternatively for
computers which do not have the Crystal Reports Web Components installed, if required by eServer the user will be
guided through the download and installation process.
NOTE
Ensure to be logged into the computer as a System Administrator to install the Crystal Reports Web Components.
NOTE
The Crystal Reports Web Components bundle is a 100MB file download. Installing this software will require being
logged in as a System Administrator.
IMPORTANT