Innotech eServer - Manual (Page 75)

Page 75
eServer Setup and Site Installation Instructions
© Mass Electronics Pty Ltd 2009 Chapter 4 – Configuring eServer Communications
4-2.3 Set Project Properties for the Access Database
Select Project from the menu bar, and open the Project Properties as illustrated below in Figure 4-2.
Figure 4-2: Open Project Properties to enter the Access database settings
In the Project Properties menu, select the Database Server type. The default is No Database. Use the
dropdown list to select the Access database as illustrated below in Figure 4-3.
Figure 4-3: Selecting Access database in Magellan Project Properties