Brother MFC-820CW - Manual (Page 134)

118
Even though the machine tells you that an ink
cartridge is empty, there will be a small
amount of ink left in the ink cartridge. It is
necessary to keep some ink in the ink
cartridge to prevent air from drying out and
damaging the print head assembly.
a
Lift the scanner cover from the right-
hand side of the machine until it locks
securely into the open position.
If one or more ink cartridges are empty,
for example Black, the LCD shows
Ink Empty Black and
Replace Ink.
b
Pull the ink cartridge hook (1) toward
you and take out the ink cartridge for the
color shown on the LCD.
c
Open the new ink cartridge bag for the
color shown on the LCD, and then take
out the ink cartridge.
d
Take out the protective yellow cap (1).
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow caps come off
when you open the bag, the cartridge will
not be damaged.
e
Each color has its own correct position. Keep
the ink cartridge in an upright position when
you put it into the slot. Press down on the ink
cartridge until the hook (1) snaps over it.
1
1
1