Brother MFC-820CW - Manual (Page 43)

Sending a fax
27
4
Faxing from the scanner glass
4
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for color
faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a
Press (Fax).
b
Load your document face down on the
scanner glass.
c
Enter the fax number using the dial pad,
Speed-Dial or Search.
d
Press Black Start or Color Start.
„ If you press Black Start, the
machine starts scanning the first
page. Go to step e.
„ If you press Color Start, the
machine starts sending the
document.
e
Do one of the following:
„ To send a single page, press 2 to
choose No (or press Black Start
again).
The machine starts sending the
document.
„ To send more than one page, press
1 to choose Yes and go to step f.
f
Put the next page on the scanner glass.
Press OK.
The machine starts scanning the page.
(Repeat steps e and f for each
additional page.)
Note
If the memory is full and you are faxing a
single page, it will be sent in real time.
Faxing A4 size documents
from the scanner glass
4
When documents are A4 size, you need to
set Scan Size to A4. If you do not, the bottom
portion of the faxes will be missing.
a
Press (Fax).
b
Press a or b to choose Scan Size.
Press OK.
c
Press a or b to choose A4 (or
Letter).
Press OK.
Note
You can save the setting you use most
often by setting it as default. (See
page 31.)
Canceling a fax in progress
4
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
Color fax transmission
4
Your machine can send a color fax to
machines that support this feature.
However, color faxes cannot be stored in the
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).